Skip to product information
1 of 1

Commercial Pool and Spa Supplies

8" FVD Double Arm Float Valve - Open Pipe

8" FVD Double Arm Float Valve - Open Pipe

SKU:8FVD-OP

Regular price $2,914.00
Regular price Sale price $2,914.00
Sale Sold out
Shipping calculated at checkout.
Quantity

The 8" FVD Double Arm Float Valve – Open Pipe (also cataloged as 8FVDP-OP in standard commercial PVC aquatic flow-control lines) is a heavy-duty, balanced-leverage large-bore mechanical water-level control valve engineered for high-volume commercial aquatic surge tanks, collector pits, balance tanks, and open-channel gravity return systems. Installed directly onto an open-ended 8-inch horizontal or downward-turned gravity return pipe stub inside a surge pit, the dual-arm yoke architecture distributes massive closing forces symmetrically across the 8-inch valve disc—preventing side-loading, torsional twisting, and premature seat wear under elevated gravity static heads or turbulent surge conditions.

Parameter Specification
Equipment / Part Reference 8" FVD Double Arm Float Valve – Open Pipe (8FVDP-OP)
Nominal Pipe Size 8.0 in (200 mm / DN200)
Inlet Connection Type Open-Pipe Mount: Female Slip Socket (Schedule 40/80 IPS, 8.625" ID socket) or Slide-On Locking Hub for bare 8.0" nominal (8.625" actual OD) open pipe end
Discharge Configuration Unobstructed Open-Discharge / Free-Fall Port (zero downstream backpressure)
Actuation Mechanism Mechanical Double-Arm Yoke Lever Linkage (symmetrical dual-side arms providing balanced axial closing force; requires no electricity or compressed air)
Valve Body & Housing Material Heavy-duty machined Schedule 80 PVC, CPVC, or molded high-impact ABS / FRP composite
Pivot Arms & Linkage Hardware Dual heavy-gauge 316 Marine-Grade Stainless Steel arms, structural cross-yoke, machined pivot clevises, hinge pins, and locknuts (eliminates torsional twisting and galvanic corrosion)
Float Ball / Buoyancy Element Heavy-wall seamless Polyethylene (HDPE), Polypropylene, or 316 Stainless Steel oversized spherical/cylindrical float (typically 14" to 16" diameter)
Seat & Disc Seal Material Replaceable thick-wall EPDM or Neoprene elastomer disc / flapper seal for drip-tight shutoff
Recommended Gravity Flow Capacity Approx. 750 to 1,600 US gpm (170.3 to 363.4 m³/h) at standard gravity head (1 to 4 ft water column)
Maximum Operating Pressure 15 to 25 psi (1.03 to 1.72 bar) — significantly higher shutoff stability and pressure tolerance than single-arm 8" (8FVSP-OP) designs due to balanced double-arm leverage
Operating Temperature Range 32°F to 120°F (0°C to 49°C)
Level Adjustment Range Indexed dual-pivot clevises and adjustable float rod pitch allow precise field calibration of shutoff water elevation (+/- 4 to 8 in)
Compliance / Standards NSF/ANSI Standard 50 compatible materials; meets Model Aquatic Health Code (MAHC) surge tank overflow protection guidelines

Hydraulic & Mechanical Operating Details

  • Balanced Dual-Arm Seating on 8-Inch Bores: Across a 50.3 sq. in. orifice area, even modest gravity head generates substantial hydraulic seating resistance. The 8" FVD Double Arm straddles both sides of the valve housing with twin heavy-gauge 316 stainless steel arms tied into a rigid cross-yoke, translating buoyancy from the 14"–16" float into uniform, perpendicular closing force against the EPDM seat—preventing disc cocking, chatter, or uneven seal wear.

  • Open-Pipe Installation: Built specifically for installations where the 8" perimeter gutter or main-drain gravity line terminates cleanly inside the surge tank wall without a bolted ANSI flange. The female PVC hub slips directly onto the 8" pipe stub and is secured via PVC solvent cement or stainless steel mechanical locking screws.

  • Surge & Turbulence Stability: The twin-arm structural yoke resists lateral deflection caused by splashing, wave action, or cascading gutter discharge inside turbulent balance pits on Olympic 50-meter pools, wave lagoons, and water parks.

  • Shipping Weight: Approx. 38 to 52 lbs (17.2 to 23.6 kg) complete with 8" valve body, dual heavy-duty 316 SS pivot arms, cross-yoke linkage hardware, and oversized float ball.

View full details