LONG REACH TRAVELER BP 350

The Spectrum Aquatics Long Reach Traveler BP 350 (Part #163340 / legacy #27620; 316L Marine Upgrade #140292) is a specialized commercial-grade, ADA-compliant pool lift engineered specifically for facilities with extreme setbacks, wide rim-flow/parapet gutters, or raised coping walls that standard-reach pool lifts cannot clear.

While maintaining the mobility, 360-degree powered rotation, and structural platform of the Traveler family, the Long Reach version extends the horizontal boom geometry to bridge broad perimeter obstacles.

Key Technical Specifications

• Lifting Capacity: 350 lbs (158.8 kg) dynamic operating load rating (reduced from 500 lbs to compensate for the significantly elongated moment arm and cantilever forces).

• Extended Reach / Setback Range: Accommodates deck-to-water setbacks from 18" up to 48", clearing wide grating, deck drainage troughs, raised curbs, or broad perimeter overflow gutters.

• Vertical Travel / Draft: Deep immersion stroke submerging the seat up to 18" below deck water level, exceeding the ADA requirement of 16" below the stationary water surface.

• Power Architecture: Low-voltage 24V DC battery system providing 90+ continuous cycles on a full charge; comes with an off-deck wall-mounted charging station.

• Motion & Slewing: Fully powered linear vertical elevation paired with continuous 360° powered horizontal rotation.

• Controls: Supplied with two watertight wireless remote controls, allowing autonomous swimmer entry and retrieval from both deck and water positions without cord entanglements over wide coping.

• Metallurgy & Coating: Electropolished, passivated 304L stainless steel finished with Spectra Shield® protectant (optional 316L stainless steel package available for high-salinity or harsh indoor natatorium air).

• Standard Ergonomics: Flip-up padded armrests, swing-away/adjustable footrest, padded headrest, and an ADA-compliant seat belt.

Anchor & Accessory Compatibility

• Deck Anchor Interface: Installs into a standard 1.90" ID commercial bronze anchor socket (Part #23638-00 / 6" deep embedment with an equipotential bonding lug), consistent with the Traveler platform.

• Retrofit / Deck Sleeves: Compatible with standard 1.90" deck mounts, allowing conversion of existing 1.90" deck sockets.

• Dedicated Transport Cart: Compatible with the Traveler Transport Cart (Part #54523) for seasonal storage and off-deck transit.

• Protective Fitted Cover: Marine-grade fitted all-weather cover sized for extended boom geometry (Part #54378 / #54377 series).

• Rescue Backboard Interface: Compatible with the Traveler Spineboard Attachment (Part #42323) for emergency extrication protocols.