NORDESCO Plastic Bench 11ft - Sand

The Nordesco Plastic Bench 11ft - Sand (standard profile) is an extended-run, high-capacity commercial freestanding bench engineered for expansive natatorium concourses, collegiate athletic locker rooms, aquatic wellness centers, and long perimeter corridors. Spanning 132 inches with a space-saving 12-to-14-inch seat depth, it accommodates high-density multi-patron seating while preserving open traffic lanes in wet, chemical-intensive environments.

Functional Overview & Materials

Built for rigorous commercial use and continuous exposure to harsh pool water chemistry:

• Heavy-Duty Polypropylene Slats (Sand): Fabricated from UV-stabilized, high-density virgin thermoplastic slats in an integral "Sand" (warm tan/beige) tone. Chemically inert and non-porous, the material resists chloramine vapor, chlorinated splash-out, body oils, and concentrated sanitizers without warping, rotting, chipping, splintering, or harboring bacteria.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct splash-out, shower runoff, and washdown spray straight through to deck drains below, eliminating standing surface puddles, speeding evaporation, and preserving wet-traction safety for barefoot occupants.

• Six-Pedestal Understructure: Supported by six heavy-duty upright pedestal frames made from reinforced structural polymer or passivated stainless steel. This dense multi-post layout eliminates long-span midpoint deflection under dynamic live-load shifts across the 132-inch span.

• Deck Protection: Fitted with non-marking, chemical-resistant rubber/urethane foot pads that protect wet tile, plaster, epoxy, and acrylic deck coatings from abrasion, scuffing, or gouging.

Technical Specifications

• Nominal Length: 132 inches (11 feet / approx. 335.3 cm).

• Bench Depth (Standard Profile): Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm).

• Nominal Height: Standard commercial seat height of 17 to 18 inches (approx. 43.2 to 45.7 cm).

• Load Rating: Rated for 1,650 to 1,900 pounds (748 to 862 kg) uniformly distributed commercial working load.

• Base Configuration: Freestanding six-pedestal layout, pre-drilled or compatible with optional surface hold-down brackets for permanent deck or floor anchoring.