NORDESCO Wall Mount Bench 12ft - Sand

The Nordesco 11-Foot Wall-Mount Bench (Sand) is an extended commercial cantilevered seating platform engineered for expansive natatorium concourses, collegiate athletic facilities, and stadium-scale locker room corridors where warm earth-tone architectural finishes are specified. Spanning 132 inches, it delivers high-density multi-occupant seating capacity while preserving a completely unobstructed floor plane below.

Functional Overview & Materials

Designed to optimize perimeter wall space and resist continuous exposure to harsh pool chemistry:

• Polypropylene Slat Platform (Sand): Fabricated from heavy-duty, UV-stabilized virgin thermoplastic slats in an integral "Sand" (warm tan/beige) finish. The solid, non-porous profile prevents absorption of water, sweat, body oils, and chloramine vapors, eliminating rotting, chipping, splintering, and fungal growth.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct splash-out, shower runoff, and washdown spray straight through to the deck drains below, preventing surface puddle formation and speeding air drying for barefoot patrons.

• Multi-Bracket Cantilever Substructure: Supported by seven heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets. This multi-bracket layout eliminates midpoint deflection across the 132-inch span and distributes dynamic occupant loads safely into the structural wall substrate.

• Unobstructed Floor Sanitation: Elevating the bench entirely off the deck allows commercial walk-behind scrubbers, wide floor squeegees, and pressure sprayers to clean wall-to-wall without catching on pedestals or creating bacteria traps.

Technical Specifications

• Nominal Length: 132 inches (11 feet / approx. 335.3 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 1,650 to 1,900 pounds (748 to 862 kg) uniformly distributed commercial working load when anchored into poured structural concrete, fully grouted CMU masonry, or continuous structural in-wall blocking.

• Bracket Count: 7 heavy-duty stainless steel cantilever brackets featuring pre-drilled flange holes sized for 3/8" or 1/2" commercial structural masonry anchors or through-bolts.