NORDESCO Wall Mount Bench 2ft - Sand

The Nordesco 2-Foot Wall-Mount Bench (Sand) is a compact, heavy-duty cantilevered seating unit engineered for wet-facility environments where floor space is at a premium and earth-tone architectural aesthetics are preferred. It is commonly deployed in individual shower stalls, single-occupancy ADA changing cubicles, sauna anterooms, and therapy washdown stations.

Functional Overview & Materials

Designed for sanitary, space-efficient seating without any deck contact:

• Polypropylene Slat Platform (Sand): Assembled from solid, UV-stabilized virgin thermoplastic slats in a neutral "Sand" (beige/tan) finish. The non-porous material prevents the absorption of pool splash-out, sweat, body oils, chloramines, or sanitizing agents, eliminating rust, rot, splinters, and mildew.

• Rapid Drainage & Airflow: Longitudinal spacing between slats allows direct water runoff straight to the floor drains below, preventing surface puddle formation and speeding air drying.

• Corrosion-Resistant Cantilever Frame: Supported by two heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets that mount securely to the wall substrate, eliminating floor-level obstructions.

• Sanitation Access: Completely off-deck mounting enables automated scrubbers, industrial squeegees, and pressure sprayers to clean wall-to-wall without catching on furniture legs or creating dirt/grime traps.

Technical Specifications

• Nominal Length: 24 inches (2 feet / approx. 61.0 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 350 to 450 pounds (159 to 204 kg) distributed working load when installed into solid concrete, grouted CMU block, or heavy structural wall blocking.

• Bracket Count: 2 heavy-duty stainless cantilever brackets with pre-drilled flange holes sized for 3/8" or 1/2" mechanical masonry anchors or structural through-bolts.