NORDESCO Wall Mount Bench 4ft - Sand

The Nordesco 4-Foot Wall-Mount Bench (Sand) is a standard-length commercial cantilevered seating platform engineered for wet-area perimeter walls, pool deck observation lines, and locker room corridors where warm earth-tone finishes are specified. At 48 inches, it provides multi-patron capacity while keeping the floor completely open for sanitation and transit.

Functional Overview & Materials

Built to combine structural stability, user comfort, and aggressive chemical resistance:

• Polypropylene Slat Platform (Sand): Fabricated from UV-stabilized, high-density virgin thermoplastic slats in a uniform "Sand" (warm tan/beige) tone. Non-porous and chemically inert, the slats will not warp, splinter, absorb moisture, or support mold, mildew, or bacterial growth under continuous chloramine exposure.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct shower spray, pool splash-out, and washdown water straight to the floor drains below, accelerating drying times and maintaining high-traction footing for barefoot occupants.

• Corrosion-Proof Cantilever Frame: Supported by three heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets, eliminating mid-span deflection across the 48-inch run and securing the bench off the floor.

• Unobstructed Deck Maintenance: The fully wall-hung design eliminates floor-contact legs, allowing automated scrubbers, wide floor squeegees, and pressure washers to clean wall-to-wall without maneuvering around obstructions.

Technical Specifications

• Nominal Length: 48 inches (4 feet / approx. 122.0 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall surface.

• Load Rating: Rated for 600 to 700 pounds (272 to 318 kg) uniformly distributed commercial working load when anchored into reinforced masonry, poured concrete, or structural in-wall blocking.

• Bracket Count: 3 heavy-duty stainless steel cantilever brackets with pre-drilled flange holes sized for 3/8" or 1/2" commercial structural anchors or through-bolts.