NORDESCO Wall Mount Bench 5ft - Sand

The Nordesco 5-Foot Wall-Mount Bench (Sand) is a mid-length commercial cantilevered bench engineered for high-traffic aquatic facilities, public natatorium concourses, and athletic locker room dressing aisles requiring earth-tone architectural finishes. At 60 inches, it comfortably accommodates multiple seated patrons while maintaining complete floor clearance underneath.

Functional Overview & Materials

Built for heavy dynamic loading, hygiene, and full resistance to natatorium air and water conditions:

• Polypropylene Slat Platform (Sand): Fabricated from UV-stabilized, non-porous virgin thermoplastic slats in a durable "Sand" (warm tan/beige) tone. Chemically inert and impervious to chloramine vapor, splash-out, sweat, and hospital-grade disinfectants, it completely eliminates peeling, rotting, splintering, and fungal growth.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct pool runoff, shower water, and washdown spray straight to deck drainage lines, preventing standing surface puddles and accelerating evaporation.

• Three-Bracket Cantilever Substructure: Supported by three heavy-gauge, electropolished 304 or 316 stainless steel cantilever brackets to provide structural rigidity, eliminate center-span sagging across the 60-inch run, and safely transfer live dynamic loads into the wall.

• Complete Floor Clearance: The cantilevered installation leaves the deck 100% open, enabling commercial floor scrubbers, wide squeegees, and pressure sprayers to clean wall-to-wall without catching on pedestals or creating bacteria traps.

Technical Specifications

• Nominal Length: 60 inches (5 feet / approx. 152.4 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 750 to 900 pounds (340 to 408 kg) uniformly distributed commercial working load when anchored according to engineering specs into poured structural concrete, fully grouted CMU masonry, or continuous structural in-wall blocking.

• Bracket Count: 3 heavy-duty stainless steel cantilever brackets featuring pre-drilled flange holes sized for 3/8" or 1/2" commercial structural anchors or through-bolts.