Skip to product information
1 of 1

Commercial Pool and Spa Supplies

NORDESCO Wall Mount Bench 6ft - Grey

NORDESCO Wall Mount Bench 6ft - Grey

SKU:68.1006

Regular price $1,200.00
Regular price Sale price $1,200.00
Sale Sold out
Shipping calculated at checkout.
Quantity

The Nordesco 6-Foot Wall-Mount Bench (Grey) is the maximum standard continuous span in Nordesco’s cantilevered commercial seating lineup. It is engineered for high-capacity, heavy-traffic aquatic environments, such as varsity team locker rooms, public recreation corridors, and high-volume natatorium perimeters.

Functional Overview & Materials

Designed to provide uninterrupted multi-person seating across long architectural wall surfaces while keeping the floor 100% unobstructed:

  • Reinforced Polymer Slat Platform: Constructed from high-density, UV-stabilized virgin polypropylene slats in neutral grey. The solid, non-porous profile does not absorb water, sweat, chloramines, or sanitizing agents, eliminating risks of rust, delamination, splintering, or fungal buildup.

  • Rapid Drainage & Airflow: Longitudinal drainage slots prevent puddles from standing after swimmers exit the water, accelerating evaporation and maintaining slip-resistant seating for barefoot or suited occupants.

  • Heavy Cantilever Substructure: Supported by four heavy-gauge, electropolished stainless steel triangular wall brackets engineered to support long-span loads and eliminate center-span deflection.

  • Hygiene & Facility Upkeep: Eliminates floor pedestals entirely, allowing automated scrubbers, industrial squeegees, and pressure washers to clean wall-to-wall without snagging furniture legs or creating dirt/chloramine traps.

Technical Specifications

  • Nominal Length: 72 inches (6 feet / approx. 182.9 cm).

  • Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

  • Load Rating: Rated for 900 to 1,000+ pounds (408 to 453 kg) uniformly distributed commercial working load when anchored according to factory torque specs into solid poured concrete, grouted CMU masonry, or reinforced structural backing.

  • Bracket Count: 4 heavy-duty stainless steel cantilever brackets with pre-drilled flange holes sized for 3/8" or 1/2" commercial masonry anchors or structural through-bolts.

View full details