NORDESCO Wall Mount Bench 7ft - Sand

The Nordesco 7-Foot Wall-Mount Bench (Sand) is an extended commercial cantilevered seating platform engineered for high-volume aquatic facilities, varsity team locker rooms, and natatorium perimeter staging bays where a warm, neutral earth-tone aesthetic is specified. At 84 inches, it provides substantial multi-person seating capacity while keeping the floor completely open for rapid maintenance and sanitation.

Functional Overview & Materials

Designed to withstand aggressive indoor pool environments while eliminating floor-level cleaning obstacles:

• Polypropylene Slat Platform (Sand): Fabricated from heavy-duty, UV-stabilized virgin thermoplastic slats in an integral "Sand" (warm tan/beige) tone. Chemically inert and non-porous, the material does not absorb water, sweat, body oils, or chloramines, completely eliminating chipping, rotting, splintering, and mold or mildew accumulation.

• Rapid Drainage & Airflow: Longitudinal spacing between slats allows shower spray and pool splash-out to drain directly through to floor drains below, preventing surface puddle formation and accelerating evaporation for barefoot occupants.

• Five-Bracket Cantilever Substructure: Supported by five heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets. This multi-point layout eliminates midpoint deflection across the 84-inch span and distributes dynamic occupant loads safely into the wall substrate.

• Unobstructed Floor Sanitation: Elevating the bench entirely off the deck allows commercial walk-behind scrubbers, wide floor squeegees, and pressure sprayers to clean wall-to-wall without navigating around pedestals or creating bacteria traps.

Technical Specifications

• Nominal Length: 84 inches (7 feet / approx. 213.4 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 1,050 to 1,200 pounds (476 to 544 kg) uniformly distributed commercial working load when anchored according to factory engineering specs into poured structural concrete, fully grouted CMU masonry, or continuous structural in-wall blocking.

• Bracket Count: 5 heavy-duty stainless steel cantilever brackets featuring pre-drilled flange holes sized for 3/8" or 1/2" commercial structural masonry anchors or through-bolts.