Commercial Pool and Spa Supplies
NORDESCO Wall Mount Bench 7ft - Grey
NORDESCO Wall Mount Bench 7ft - Grey
SKU:68.1007
Couldn't load pickup availability
The Nordesco 7-Foot Wall-Mount Bench (Grey) is an extra-long commercial cantilevered seating assembly engineered for high-volume natatorium perimeters, team staging zones, and oversized locker room corridors requiring continuous, uninterrupted wall seating.
Functional Overview & Materials
Designed to bridge extended wall spans while keeping the floor completely clear for mechanical cleaning and barefoot transit:
-
High-Density Polymer Slat Surface: Assembled from UV-stabilized, high-impact polypropylene slats in neutral grey. The solid, non-porous structure is impervious to chloramine exposure, concentrated cleaning solutions, body oils, and constant moisture, preventing cracking, rotting, and bacterial colonies.
-
Continuous Drainage Channeling: Longitudinal spacing between slats promotes rapid fluid drainage and cross-ventilation, preventing water pooling and accelerating surface drying after high-volume pool use.
-
Heavy Multi-Point Cantilever Substructure: Utilizes four to five heavy-gauge, electropolished 304 or 316 stainless steel cantilever brackets to eliminate long-span sagging and evenly distribute high dynamic loads across the wall structure.
-
Sanitation Access: Completely off-deck mounting enables maintenance teams to operate automated floor scrubbers, high-pressure washers, and wide commercial squeegees straight to the baseboard without encountering floor pedestals or grime traps.
Technical Specifications
-
Nominal Length: 84 inches (7 feet / approx. 213.4 cm).
-
Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall surface.
-
Load Rating: Rated for 1,050 to 1,200 pounds (476 to 544 kg) uniformly distributed commercial working load when anchored into reinforced masonry, solid poured concrete, or structural in-wall blocking.
-
Bracket Count: 4 to 5 heavy-duty stainless steel cantilever brackets with pre-drilled flange holes sized for 3/8" or 1/2" commercial masonry fasteners or through-bolts.
