NORDESCO Wall Mount Bench 7ft - Sand

The Nordesco 6-Foot Wall-Mount Bench (Sand) is a heavy-duty commercial cantilevered seating platform engineered for medium-to-large aquatic facilities, varsity team locker rooms, and natatorium perimeter corridors where a warm earth-tone architectural aesthetic is specified. At 72 inches, it delivers high-capacity multi-patron seating while preserving a completely open floor plane below.

Functional Overview & Materials

Designed to optimize perimeter wall space while eliminating floor-level cleaning obstacles in aggressive wet environments:

• Polypropylene Slat Platform (Sand): Fabricated from UV-stabilized, high-impact virgin thermoplastic slats in a uniform "Sand" (warm tan/beige) tone. The non-porous composite is impervious to chloramine vapor, chlorinated splash-out, body oils, and concentrated sanitizing agents, eliminating cracking, peeling, rotting, splintering, and fungal growth.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct washdown water and pool splash-out straight through to the deck drains below, preventing surface puddling and speeding air drying for barefoot patrons.

• Four-Bracket Cantilever Substructure: Supported by four heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets. This multi-bracket layout eliminates midpoint deflection across the 72-inch span and safely transfers heavy dynamic live loads into the building structure.

• Unobstructed Deck Maintenance: The wall-mounted design eliminates pedestals and floor penetrations entirely, allowing commercial auto-scrubbers, wide floor squeegees, and pressure washers to clean wall-to-wall without snagging or creating grime traps.

Technical Specifications

• Nominal Length: 72 inches (6 feet / approx. 182.9 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 900 to 1,050 pounds (408 to 476 kg) uniformly distributed commercial working load when anchored into poured structural concrete, fully grouted CMU masonry, or continuous structural in-wall blocking.

• Bracket Count: 4 heavy-duty stainless steel cantilever brackets featuring pre-drilled flange holes sized for 3/8" or 1/2" commercial structural anchors or through-bolts.

Weight and Shipping Profile

• Actual Product Weight: Approximately 32.0 to 39.0 pounds (roughly 14.5 to 17.7 kg), including the 72-inch polymer seat assembly and four stainless mounting brackets.

• Physical Footprint (Packaged): Elongated parcel carton measuring approximately 74" L × 15" W × 6" H.

• Packaged Shipping Weight: Typically scales at 38.0 to 46.0 pounds in a heavy-duty, double-wall corrugated shipping carton with corner impact protectors.

• Logistics Handling: Ships via standard ground parcel services (UPS / FedEx Ground), subject to carrier oversize length surcharges (>70 inches).