NORDESCO Wall Mount Bench 9ft - Sand

The Nordesco 9-Foot Wall-Mount Bench (Sand) is an extended-run, commercial cantilevered bench engineered for high-capacity aquatic venues, stadium locker rooms, and natatorium perimeter walls requiring warm, earth-tone architectural aesthetics. Spanning 108 inches, it provides substantial multi-person seating capacity while keeping the floor completely unobstructed for facility sanitation.

Functional Overview & Materials

Designed for high-traffic commercial use and total resistance to corrosive pool environments:

• Polypropylene Slat Platform (Sand): Fabricated from heavy-duty, UV-stabilized virgin thermoplastic slats in an integral "Sand" (warm tan/beige) tone. Chemically inert and non-porous, the material does not absorb water, sweat, body oils, or chloramines, completely eliminating chipping, rotting, splintering, and mold or mildew accumulation.

• Rapid Drainage & Airflow: Longitudinal drainage slots allow pool runoff, shower water, and washdown spray to drain directly through to floor drains, preventing surface puddle formation and speeding air drying for barefoot patrons.

• Six-Bracket Cantilever Substructure: Supported by six heavy-gauge, electropolished 304 or 316 stainless steel triangular cantilever brackets. This dense bracket spacing eliminates center-span deflection across the 108-inch span and distributes dynamic occupant loads safely into the structural wall substrate.

• Unobstructed Floor Sanitation: Elevating the bench entirely off the deck allows commercial walk-behind scrubbers, wide floor squeegees, and pressure sprayers to clean wall-to-wall without maneuvering around pedestals or creating bacteria traps.

Technical Specifications

• Nominal Length: 108 inches (9 feet / approx. 274.3 cm).

• Bench Depth / Seat Width: Approximately 12 to 14 inches (approx. 30.5 to 35.5 cm) projection from the finished wall face.

• Load Rating: Rated for 1,350 to 1,550 pounds (612 to 703 kg) uniformly distributed commercial working load when anchored according to factory engineering specs into poured structural concrete, fully grouted CMU masonry, or continuous structural in-wall blocking.

• Bracket Count: 6 heavy-duty stainless steel cantilever brackets featuring pre-drilled flange holes sized for 3/8" or 1/2" commercial structural masonry anchors or through-bolts.