NORDESCO Wide Plastic Bench 10ft - Sand

The Nordesco Wide Plastic Bench 10ft - Sand is an ultra-long commercial freestanding bench engineered with an expanded seating depth for high-capacity facilities requiring enhanced stability, gear staging capacity, and warm earth-tone architectural finishes. Spanning 120 inches with a generous 17-to-20-inch seating surface, it delivers high-density multi-patron seating for Olympic natatoriums, university athletic complexes, community recreation centers, and expansive locker room dressing aisles.

Functional Overview & Materials

Built for rigorous commercial use and continuous exposure to wet, chemically demanding natatorium atmospheres:

• Polypropylene Slat Platform (Sand): Fabricated from heavy-duty, UV-stabilized virgin thermoplastic slats in an integral "Sand" (warm tan/beige) tone. Chemically inert and non-porous, the material resists chloramine vapor, chlorinated splash-out, sweat, and hospital-grade sanitizers without chipping, rotting, splintering, or harboring mold and bacteria.

• Expanded Wide Profile: Features an enlarged seat depth (approximately 17 to 20 inches) compared to the standard 12-to-14-inch narrow profile, delivering elevated ergonomic comfort, broad footprint stability against tipping, and ample space for athlete duffels and gear bags.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct shower spray, pool runoff, and washdown water straight through to the deck drains below, preventing surface puddle formation, speeding air drying, and maintaining barefoot wet-traction safety.

• Five-to-Six Pedestal Framework: Supported by five to six structural upright pedestal frames fabricated from reinforced structural polymer or passivated stainless steel hardware. This dense multi-post foundation eliminates center-span sagging across the 120-inch run and safely distributes dynamic live loads across the deck.

• Deck Protection: Outfitted with non-marking, chemical-resistant rubber/urethane leveling feet that protect wet tile, plaster, epoxy, and acrylic deck coatings from abrasion, scuffing, or gouging.

Technical Specifications

• Nominal Length: 120 inches (10 feet / approx. 304.8 cm).

• Bench Depth (Wide Profile): Approximately 17 to 20 inches (approx. 43.2 to 50.8 cm).

• Nominal Height: Standard commercial seat height of 17 to 18 inches (approx. 43.2 to 45.7 cm).

• Load Rating: Rated for 1,550 to 1,800 pounds (703 to 816 kg) uniformly distributed commercial working load.

• Base Configuration: Freestanding multi-pedestal stance, pre-drilled or compatible with optional surface hold-down brackets for permanent deck or floor anchoring.