NORDESCO Wide Plastic Bench 7ft - Sand

The Nordesco Wide Plastic Bench 7ft - Sand is an extended-span commercial freestanding bench engineered with an expanded seating depth for facilities requiring enhanced stability, gear staging space, and warm earth-tone architectural finishes. Spanning 84 inches, it provides substantial multi-patron seating capacity combined with a generous 17-to-20-inch seating surface suited for varsity locker room dressing bays, aquatic center concourses, and team staging perimeters.

Functional Overview & Materials

Built for demanding commercial wet environments and continuous exposure to harsh pool chemistry:

• Polypropylene Slat Platform (Sand): Fabricated from heavy-duty, UV-stabilized virgin thermoplastic slats in an integral "Sand" (warm tan/beige) tone. The non-porous structure is impervious to chloramine vapor, chlorinated splash-out, sweat, and concentrated sanitizers, eliminating warping, rotting, splintering, and mold or bacterial growth.

• Expanded Wide Profile: Features an enlarged seat depth (approximately 17 to 20 inches) compared to the standard 12-to-14-inch narrow profile, delivering elevated ergonomic comfort, a broad base for maximum tip resistance, and ample space for athlete bags and gear.

• Rapid Drainage & Airflow: Longitudinal drainage slots direct shower water, pool splash-out, and washdown spray straight through to the deck drains below, eliminating standing water puddles and speeding air drying for barefoot patrons.

• Four-Pedestal Understructure: Supported by four structural upright pedestal frames fabricated from reinforced structural polymer or passivated stainless steel hardware. This dense multi-post layout eliminates long-span center deflection under dynamic multi-occupant loads across the 84-inch run.

• Deck Surface Protection: Outfitted with non-marking, chemical-resistant rubber/urethane leveling feet that protect wet tile, plaster, epoxy, and acrylic deck coatings from abrasion, scuffing, or gouging.

Technical Specifications

• Nominal Length: 84 inches (7 feet / approx. 213.4 cm).

• Bench Depth (Wide Profile): Approximately 17 to 20 inches (approx. 43.2 to 50.8 cm).

• Nominal Height: Standard commercial seat height of 17 to 18 inches (approx. 43.2 to 45.7 cm).

• Load Rating: Rated for 1,100 to 1,300 pounds (499 to 590 kg) uniformly distributed commercial working load.

• Base Configuration: Freestanding four-pedestal stance, compatible with optional surface hold-down brackets for permanent deck or floor anchoring.