SRS 10' Commercial Frontier III Board, Pewter Gray (Matching Tread)

The S.R. Smith Part Number 66-209-610S20T designates a 10-Foot Commercial Frontier III Diving Board Kit with Factory-Installed Tip Protection / Mounting Hardware, finished in Taupe (or Earth/Specialty Commercial Tan aggregate tread).

This complete assembly pairs S.R. Smith’s 10-foot heavy-duty commercial fiberglass/wood-laminated springboard with reinforced mounting hardware, engineered specifically for high-traffic municipal facilities, commercial resorts, and HOA aquatic centers.

Part Number Breakdown & Configuration

• 66-209: S.R. Smith Commercial Frontier III Board Series (18" nominal width, commercial core).

• 610: Board length designation (10'-0" / 120 inches).

• S20: Color and tread finish code:

  • Earth / Taupe commercial gelcoat finish with integrated non-slip aggregate.

• T: Factory tip-protective trim / commercial hardware provision package.

Structural & Material Architecture

• Laminated Composite Core: Multi-ply Douglas fir and engineered laminated wood core running the full length of the board to provide consistent spring mechanics, energy dissipation, and high cycle-fatigue resistance.

• Fiberglass Roving Encapsulation: Thick structural fiberglass resin matrix completely seals the core against water intrusion, delamination, chemical rot, and high-temperature pool deck environments.

• Non-Slip Top Tread: High-traction, factory-embedded textured acrylic gelcoat surface designed to meet public pool slip-resistance thresholds while remaining non-abrasive for barefoot bathers.

• Chemical & Weather Resistance: Outer resin system contains UV stabilizers to prevent chalking, brittleness, and fading under intense sunlight, along with high resistance to chlorinated and chloramine-rich atmospheres.

Dimensional & Mechanical Specifications

• Nominal Length: 10'-0" (120 inches / approx. 3.05 m).

• Nominal Width: 18 inches (approx. 45.7 cm).

• Core Profile: Progressive thickness taper (approx. 1.5" to 2.25") from the butt end to the board tip for controlled spring leverage.

• Butt-End Hole Pattern: Standard commercial 2-hole drill pattern:

  • Center-to-Center Spacing: 12 inches (30.5 cm).

  • Hole Diameter: Pre-drilled for 1/2" diameter heavy-duty stainless steel carriage/hex mounting bolts.

• Specified Fulcrum Setting: Standard fulcrum placement is 52 inches (±2 inches) forward from the center of the rear mounting holes. Adhering to this dimension is required to prevent premature core fatigue or warranty forfeiture.

• Commercial Duty Rating: Maximum single-diver weight capacity of 250 lbs (113.4 kg) under standard commercial aquatic codes.

Compatible Stands & Hardware

• Stand Compatibility: Compatible with commercial U-frame stands, heavy-duty cantilever steel frames, pedestal meter stands (such as the S.R. Smith Steel Meter Stand), and standard commercial 2-bend or 3-bend tubular bases.

• Associated Mounting Kit: Compatible with S.R. Smith Hardware Kit BK-100 or stainless steel commercial mounting bolt sets (1/2" × 4-1/2" or 1/2" × 5" grade 304/316 bolts, neoprene isolator washers, lock washers, and brass or stainless acorn caps).

Shipping and Logistics Profile

• Net Unit Weight: Approximately 58 to 65 lbs (approx. 26.3 to 29.5 kg).

• Packaged Dimensions: Reinforced heavy-gauge corrugated shipping sleeve measuring approximately 122" L × 20" W × 4" H (approx. 310 cm × 51 cm × 10 cm).

• Packaged Shipping Weight: Approximately 70 to 80 lbs (approx. 31.8 to 36.3 kg).

• Freight Classification: Must ship via LTL Freight due to the overlength 10-foot profile (typically NMFC Class 70 to 85, subject to carrier overlength surcharge).